Q-See QS434 User manual - Device Operation
DEVICE OPERATION
Model #: QS434
27 |
P a g e
Preview
Preview channels can be very useful if your display monitor is in public view. Select OFF for preview channeland it
will appear black on the display to give the impression that no cameras are connected and the system is not
recording.
To enable/disable preview channels:
1) Choose a channel you wish to conceal. For example, channel 3. Under PREVIEW, select OFF.
2) Click APPLY. Channel 3 will turn black. Click CLOSE in the confirmation window.
3) Click EXIT in all menus until all windows are closed.
10 VIDEO/AUDIO
Use the Video/Audio menu to set the resolution and camera video system on the DVR.
Figure 3.5.26
To configure video options (Figure 3.5.26):
1) Under VGA RESOLUTION, select 800x600 or 1024x768.
2) Under CAMERA SYSTEM, select NTSC or PAL (in the USA we use NTSC).
3) Click APPLY. Click CLOSE in the confirmation window.
4) Click EXIT in all menus until all windows are closed.
To configure audio options:
1) From the Video/Audio menu, click VOLUME SETUP. A split-screen display view appears.
2) Click any channel and adjust the slider to increase/decrease the volume for listen-in audio.
3) Click X to return to the Video/Audio menu.
4) Click APPLY. Click CLOSE in the confirmation window.
5) Click EXIT in all menus until all windows are closed.