Q-See QS434 User manual - Device Operation
DEVICE OPERATION
Model #: QS434
30 |
P a g e
5) Under SEND EMAIL, enter the sender email address.
6) Under SEND PW, enter the password of your email server.
7) Under RECV EMAIL, enter the email address that will receive the email notification.
8) Click APPLY. Click CLOSE in the confirmation window.
9) Click EXIT in all menus until all windows are closed.
13.
SYSTEM INFO
View system information, including the firmware version, MAC address, and serial number of the system.
Figure 3.5.30
14.
MOTION DETECT
Configure motion detection for each channel.
Figure 3.5.31
To configure motion detection (Figure 3.5.31):
1) Under STATUS, select ON to enable motion detection for the desired channel. Click NEXT PAGE for additional
channels (8-channel models only).
2) Under SENSITIVITY, select 1, 2, 3, or 4. The higher the number, the more sensitive the motion detection.