Q-See QS434 User manual - Device Operation
DEVICE OPERATION
Model #: QS434
32 |
P a g e
Go to MAIN menu, select ADVANCED, select MOBILE (RED square Figure 3.5.32.1) to display MOBILE setup
window (Figure 3.5.32.2)
To configure mobile notification settings:
1) Under MOBILE NETWORK, select 3G
2) Under MOBILE PORT, enter your mobile port number.
3) Click APPLY. Click CLOSE in the confirmation window.
4) Click EXIT in all menus until all windows are closed.
16.
SYSTEM
Use the System menu to update system firmware and set an automatic system reset schedule.
Figure 3.5.32
To enable auto-reset:
1) Under AUTO RESET, select ON. The Settings option appears.
2) Under SETTINGS, select EVERY DAY, EVERY WEEK, or EVERY MONTH. The date drop-down menu appears.
3) Select the date for auto-reset from the drop-down menu.
4) Enter the time for auto-reset using the Virtual Keyboard (mouse only).
5) Click APPLY. Click CLOSE in the confirmation window.
To restore factory settings:
1) Click DEFAULT SETTINGS. This will restore the system to the original factory settings.
2) Click OK in the prompt.
NOTE: Recorded video on the HDD will not be erased.