Racelogic VBOX LITE Hardware & Software Manual - page 12
VIDEO VBOX LITE MANUAL
Page | 12
22 December 2009
Getting Started with your Video VBOX LITE
Connections
Included with the Video VBOX LITE is a cigar lighter power cable, which is the primary source of power input. This is
terminated in a 2-way connector and mates with the 2-way ‘PWR’ socket on the Video VBOX LITE. The supplied GPS
antenna with the gold MCX connector at the end of the antenna cable connects directly to the ‘GPS’ connector on the
Video VBOX LITE. For more information about the GPS antenna and placement see the ‘GPS Antenna placement’
section in the troubleshooting guide.
You must connect the GPS antenna before connecting power to the Video VBOX LITE. This is necessary because on
power-up the Video VBOX LITE will look for a connected GPS antenna and automatically adjust its gain for optimum
performance.
LED Indicators
There are a series of LED indicators on the front panel of the Video VBOX LITE, their functionality is as follows:
POWER:
Solid GREEN indicates power is connected.
STATUS:
Solid GREEN indicates SD card is inserted, camera is connected and the VVB LITE is ready to log.
GPS:
Flashing GREEN indicates a Coldstart is being performed.
Off indicates no satellite lock has been attained.
Solid GREEN indicates a valid position fix.
RECORD:
Off indicates the Video VBOX LITE is waiting to write data to the card.
Solid GREEN indicates the Video VBOX LITE is logging to the SD card
IMPORTANT:
Never remove an SD card if this LED is on or flashing – you will lose video.