Racelogic VBOX LITE Hardware & Software Manual - page 35
VIDEO VBOX LITE MANUAL
Page | 35
22 December 2009
Modifying Scene Properties
The Scene properties window shows the properties for the Scene currently displayed in the Main View Window.
The following options are available from within the Scene properties:
Grid Set-Up
The user can choose whether or not to display the alignment grid in the
main view window. If the grid is visible the grid spacing in pixels can be
selected.
Video VBOX LITE Type
The Video VBOX LITE is not affected by the watermark check box.
The Video VBOX LITE has only one CAN channel, checking or un-checking the VCI tab will have no effect on the VBOX
LITE CAN functionality.
The LITE checkbox should be ticked as the LITE has only one CAN channel available. If more than 1 CAN channel is set
in the scene the software will not allow it to upload to the VVB LITE.
The Four Camera box should be checked if using a four camera unit, to allow all of the associated PIP and scene
options to become available. (the four camera option is only available on the Video VBOX PRO)
Serial Application
If the Video VBOX LITE is to be used with either a Driftbox or OLED
display the Serial Application must be set accordingly in the Scene
properties.
Log Rate
This is the log rate of the Video VBOX LITE, it is fixed at 10Hz.
(10 samples a second).
Video Settings
The Video VBOX LITE is capable of recording video in PAL or NTSC format, the default quality of the video is set to
high. The screen resolutions are as follows:
PAL:
720 x 576 pixels
NTSC:
720 x 480 pixels
The resolution of the Video can be any of the following:
High:
Q1 (~ 3 Gb per hour @ full resolution)
Medium:
Q2 (~ 2 Gb per hour @ full resolution)
Low:
Q3 (~ 0.5 – 1 Gb per hour @ full resolution)