Racelogic VBOX LITE Hardware & Software Manual - Quickstart Guide
VIDEO VBOX LITE MANUAL
Page | 8
22 December 2009
Quickstart Guide
A default scene is loaded as standard. To access free scenes, please register your unit here:
www.videovbox.co.uk/register
1. Mount the GPS antenna in the centre of your vehicle’s roof, away
from roof bars or radio aerials which can cause interference.
NOTE: If there is no metal underneath the antenna, you need to
create a metallic “ground plane” to get the most reliable satellite
lock. Pictured is an example of an antenna mounted on a bike
helmet using two layers of Aluminium Foil to block un-wanted
ground reflections.
2. Push the antenna plug into the 'GPS' socket.
3. Insert the ‘PWR’ connector and screw the metal ring to
lock in place. Then plug the cigarette lighter adapter into
your vehicle.
NOTE: The Video VBOX Lite will take about 35 seconds to start, at which point the unit will beep to indicate it
has booted up.
4. Securely attach the forward facing camera (marked HI RES) to the
windscreen of your car and, if required, place the Picture-in-Picture
camera (marked LOW RES) so that it faces the driver.
Use the line on the top of the camera to make an approximate
alignment. For better alignment, either use the optional preview
monitor, or the software preview function using a USB connected
laptop (see manual).
NOTE: Make sure the camera marked HI-RES is connected to the ‘CAM1’ socket, and the one marked LOW
RES in the ‘CAM2’ socket.
5. A mono microphone is supplied as standard; plug this into the ‘MIC’ input. A stereo microphone can also be
plugged in to the same socket if required.