Racelogic VBOX LITE Hardware & Software Manual - page 48
VIDEO VBOX LITE MANUAL
Page | 48
22 December 2009
8: Setting Needle Rotation Limits
The Lower and Upper rotation limits of the needle now need to be set so that the minimum rotation point of the
needle is located at the same point as the zero point of the gauge.
Click and drag the slider button to rotate the needle around the rotation point until the needle is located at the
minimum point on the Gauge scale. Clicking the ‘Set Minimum’ button will set that point as the minimum point of
rotation, and the slider button will move to the far left of the slider control.
Now repeat the steps for the maximum rotation point. Click and drag the slider button to rotate the needle around
the rotation point until the needle is located at the maximum point on the Gauge scale. Clicking the ‘Set Maximum’
button will set that point as the maximum point of rotation, and the slider button will move to the far right of the
slider control.
If you are not happy with where you have set the minimum or maximum rotation points, clicking the ‘Reset’ button
will reset the min and max rotation points and you can start again.
If the rotation point of the needle is not correct and does not rotate smoothly, click ‘Zero Needle’ to bring the needle
back to its default position. The needle can then be selected and moved and the rotation point crosshairs adjusted.