Racelogic VBOX LITE Hardware & Software Manual - page 36
VIDEO VBOX LITE MANUAL
Page | 36
22 December 2009
Audio Settings
The Video VBOX LITE is capable of accepting either a Mono or Stereo
source of audio input. If Mono is selected the audio signal from the
microphone connected to Camera 1 will be split and recorded on both
audio channels of the video file.
If Stereo is selected the audio input from Camera 1 will be recorded on
channel 1 of the video, and the audio from Camera 2 will be recorded
on channel 2 of the video. E.g. Left and Right.
Camera Settings
The Video VBOX LITE is capable of displaying camera inputs in either
Picture in Picture mode or Four camera quadrant.
Picture in Picture will allow up to three PIP elements to be displayed in
the overlay. (Depends on VVB LITE model and number of available
cameras – four camera option only available on Video VBOX PRO)
Four camera quadrant will divide the video into four quadrants, with a camera input assigned to each quadrant.
(Depends on VVB LITE model and number of available cameras– four camera option only available on Video VBOX
PRO)
Start/Finish and Splits
Start/Finish and Split information can be loaded in to the Video VBOX
LITE, allowing Lap and Split times to be displayed on the video.
CAN
It is possible to define a CAN parameter or to load a CAN database into
the Video VBOX LITE allowing use of a CAN parameter in the video.
The baud rate of the connected CAN unit can be selected from this
menu.