Xerox Color 1000 User Manual - page 186
4. Close the front cover of the Interface Module.
5. Follow the instructions on the UI to clear other areas or to resume your print job.
Fault codes
The fault code table lists problems and suggested solutions that apply to the Interface
Module. If the problem persists after following all instructions, call your Xerox Customer
Support Center.
Recommended solution
Possible cause
Fault code
Paper jam:
048-100
048-101
048-102
048-103
048-900
048-901
048-903
• Open the front door.
• A jam occurred during
feeding.
• Carefully remove all sheets and paper
scraps from the jam clearance areas.
• A jam notification is
displayed on the UI.
• Close the front door. Verify the paper
used is within the approved paper
specifications.
Close the front door.
The front door is open.
048-300
Power off, then power on.
Decurler sensor or belt problem
048-310
048-311
048-312
048-313
048-314
048-315
048-316
Power off, then power on.
Cooling fan failure
048-317
048-318
048-319
Xerox
®
Color 800/1000 Press
14-8
User Guide
Interface Module