Xerox Color 1000 User Manual - page 228

11. In the Trim area, select the trim amount; options include:

• Use Specified Values: Uses the trim control arrows to manually set trim amounts

for the three sides of the book that are not bound.

• None: No trimming occurs for the job, just binding.

• Minimum Trim: the print server automatically applies the minimum trim possible,

which is less than .25 in./6.35 mm.

• Calculate Trim From Finish Size: This sets the width and height of the finished

size of the bound book, after trimming is complete.

Use the Trim Angles button only when the corners of a bound book are not 90º and

therefore the book is not square. If you have already bound some books and know

that one of the sides of the bound book is not being trimmed straight, you can adjust

the Top, Bottom and Fore edge angle.

12. Select the Body Paper Size for the paper that you loaded in the printer tray for the

book block.

13. Select the Cover Paper Size for the paper that you loaded in the printer tray for the

covers.

14. In the Cover Content area of the window, for Content input, select one of the

following:

• Front & Back Separately: Select if the front cover images are on the first page

and the back cover images are on the last page of the file. If you select this setting,

also set both the Front Cover (Page 1) and Back Cover (Page N) menus to one of

the following: Print on Outside, Print on Inside, Print on Both Sides, or Do not Print.

Note

When you print on both sides of the front cover, Page 2 is placed on the inside of

the cover, and when you print on both sides of the back cover, the next-to-last-page

(Page N-1) is placed on the inside.

• Front & Back Together: Select if the first page of the file if a large sheet that

contains both the front cover and the back cover. The binder wraps this cover

sheet around the book block. If you select this setting, also set the Content menu

to Print on the outside of the cover (if there are images on just the front of the

cover page in the file), or Print on Both sides of the cover (if there are images on

the front and back of the cover page in the file).

• Pre-Printed: Select if you printed the cover separately and you do not want the

print server to create a cover from the file.

15. For Spine Width, use the arrows to set the size of the spine.

For Spine Content, select Document Page if you want to print on the spine and the

image is located in the file.

Xerox

®

 Color 800/1000 Press

16-24

User Guide

Perfect Binder