Xerox Color 1000 User Manual - page 320
Recommended solution
Possible cause
Fault code
Check staples. Follow procedures to
remove and replace staple cartridge.
The staple cartridge is
empty
024 979
Remove all paper from the stacker
tray.
The finisher stacker tray is
full
024 980
Remove all paper from the finisher
top tray.
The finisher top tray is full
024 981
Remove all paper from the stacker
tray and remove any other
obstructions.
The finisher stacker tray
lower safety warning in on
024 982
Remove all paper from the booklet
tray.
The finisher booklet tray is
full
024 983
Remove all paper from the booklet
tray.
The booklet stapler low
staple F signal is on
024 984
Remove all paper from the booklet
tray.
The booklet stapler low
staple R signal is on
024 985
Remove all paper from the tray. Set
the output tray for three fold.
The booklet folder tray is
full
024 987
Check that the folder tray is correctly
attached and set.
The booklet folder tray is
full
024 988
Check the staple cartridge and reset
correctly.
There is a problem with
the booklet maker stapler
024 989
Power Off/On the machine. If the
error persists, contact the Customer
Support Center.
A communication error has
occurred with the Finisher
047 320
Remove and empty the waste
container and reinstall.
Punch Waste Container is
full or near full
112 700
Confirm the staple psoition and try
to print again.
The settings for stapling
are canceled and prints the
data
116 790
Confirm the punching position and
try to print again.
The settings for punching
are canceled
124 705
Confirm the folding settings and try
to print again.
The settings for folding are
canceled
124 706
Decrease the number of pages, or
cancel the stapling settings, then try
to print again.
The number of pages
exceeds the number of
pages that can be stapled
124 709
Xerox
®
Color 800/1000 Press
17-42
User Guide
Standard/Booklet Maker Finisher
(continued)