Xerox Color 1000 User Manual - page 199
Loss of power
If power is interrupted to the HCS:
• Ensure the power cord is plugged in to the proper wall receptacle
• Ensure that the machine power is switched “On”
• Ensure that the Ground Fault Indicator is in the “On” position
• If the power has not been restored by checking the above items, then call for service
Fault codes
Recommended solution
Possible cause
Fault code
Top Tray sensor fault
049-100
049-101
049-102
• Carefully remove all sheets and paper
scraps from jam clearance areas.
• Power Off/On the machine
• If the problem still exists, contact the
Customer Support Center.
Bypass exit sensor fault
049 104
049 105
049 106
049 108
• Carefully remove all sheets and paper
scraps from jam clearance areas.
• Power Off/On the machine
• If the problem still exists, contact the
Customer Support Center.
Stacker sensor fault
049 113
049 114
049 115
049 116
• Carefully remove all sheets and paper
scraps from jam clearance areas.
• Power Off/On the machine
• If the problem still exists, contact the
Customer Support Center.
Bypass path sensor fault
049 117
049 119
• Carefully remove all sheets and paper
scraps from jam clearance areas.
• Power Off/On the machine
• If the problem still exists, contact the
Customer Support Center.
Stacker exit sensor jam
049 121
• Carefully remove all sheets and paper
scraps from jam clearance areas.
• Power Off/On the machine
• If the problem still exists, contact the
Customer Support Center.
15-11
Xerox
®
Color 800/1000 Press
User Guide
High Capacity Stacker (HCS)