Xerox Color 1000 User Manual - page 345
Function
Component
No.
Contains staples; remove this cartridge to replace staples
and clear staple jams.
Staple cartridge
4
Container for staple waste; remove this container when
full.
Staple waste container
5
The Top Tray is used for stacked output, and can receive
up to 500 sheets of 20 lb./80 gsm paper. Copies are
delivered here when specific output features are selected,
such as Automatic sorting, Collated, Uncollated, or
Normal.
Top tray
6
The Stacker Tray is used for offset and/or stapled output,
and can hold up to 2000 sheets of 20 lb./80 gsm paper.
This tray also receives copies when you punched and
Z-folded copies.
Note
Both the Top and Stacker Trays can be used for hole
punched output (optional)
Stacker (middle) tray
7
Open to clear paper jams, replace staples, clear jammed
staples, or remove the scraps from the puncher.
Right cover
8
The optional Folder tray receives copies when you select
C-folding or Z-folding of 8.5 x 11 in./A4 output and 11 x
17 in./A3 media.
C/Z-Fold output tray
(optional)
9
Open this cover to access the machine and to clear paper
jams.
Left cover.
10
Folding feature
If your machine is equipped with the optional C/Z Folder, you can make prints using the
folding option. The option folds your prints in half (single) or in thirds (C-fold or Z-fold
types). The folding option is selected from the print driver.
Note
In order to use the folding option, the orientation of documents must be short-edge
feed (SEF). You must select a paper tray that contains SEF stock.
Fold types
These fold types are available:
19-3
Xerox
®
Color 800/1000 Press
User Guide
Standard Finisher Plus
(continued)