Xerox Color 1000 User Manual - page 66

When this option is unchecked (no or false), stocks can be selected from the print server

or from the client’s print driver by matching the same attributes (such as weight, type,

and coating) as those listed for stocks in the Stock Library. Stock names also examined,

but are not used exclusively for selection for print jobs.

Multifeed Detection

This option is used in vary rare cases, such as when a job requires the same paper tray

to have different media stocks loaded in it. For example, a job requires a special

application with heavier stock media:

• Tray 1 is loaded with both 24 lb./90 gsm and 130 lb. Cover (350 gsm)

• The print job pulls both stocks from the same tray for the same job.

• With Multifeed Detection selected, the machine detects and avoids any possible

multifeed issues. This allows the job to continue running, pulling both stocks from

the same tray, and completes the print job without faults or jams.

Near Empty Detection Level

This option is available only if the Tray Near Empty option is selected for the Auto Tray

Switch Timing feature ( System Settings  > Tray Options); otherwise, this option is

ignored. When available, this option informs the user that a tray is nearing an empty

level. This message is displayed to the user depending on where the Near Empty Detection

Level indicator is set.

Xerox

®

 Color 800/1000 Press

8-6

User Guide

Advanced Stock Setup