Xerox Color 1000 User Manual - page 373
Paper jams at the finisher output area
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.
This section describes how to remedy paper jams that occur at the following locations:
• Paper jams at the finisher top tray
• Paper jams at the finisher stacker tray
Note
Remedies differ according to the paper jam location. Follow the instructions displayed
to remove the jammed paper.
Paper jams at finisher top tray
1. Make sure that the machine has stopped printing.
2. Remove jammed paper from the finisher top tray.
Note
If paper is torn, check inside the machine and remove it.
3. Open and close the finisher right cover.
19-31
Xerox
®
Color 800/1000 Press
User Guide
Standard Finisher Plus