Xerox Color 1000 User Manual - page 200
Recommended solution
Possible cause
Fault code
HCS front door sensor fault
049 210
• Open the HCS front door.
049 211
• Carefully remove all sheets and paper
scraps from the jam clearance areas.
• Power Off/On the machine
• Close the HCS front door.
• If the problem still exists, contact the
Customer Support Center.
Stacker up/down failure
049 212
• Power Off/On the machine
049 213
• If the problem still exists, contact the
Customer Support Center.
Stacker cart sensor fault
049 214
• Power Off/On the machine
049 215
• If the problem still exists, contact the
Customer Support Center.
049 216
Stacker full sensor fault
049 217
• Power Off/On the machine
049 218
• If the problem still exists, contact the
Customer Support Center.
HCS Front Door fault
049 219
• Power Off/On the machine
• If the problem still exists, contact the
Customer Support Center.
Stacker upper/lower limit
fault
049 220
049 221
• Power Off/On the machine
• If the problem still exists, contact the
Customer Support Center.
Paper in/out sensor failure
049 224
• Carefully remove all sheets and paper
scraps from jam clearance areas.
049 225
• Power Off/On the machine
• If the problem still exists, contact the
Customer Support Center.
Xerox
®
Color 800/1000 Press
15-12
User Guide
High Capacity Stacker (HCS)
(continued)