Xerox Color 1000 User Manual - page 95
3. Rotate the cartridge to the unlock position, as shown in the following illustration.
4. Remove and dispose of the empty cartridge according to local regulations.
Tip
Do not use warm or hot water, or cleaning solvents, to remove dry ink/toner from
your skin or clothing. This will set the dry ink/toner and make it difficult to remove.
If any dry ink/toner gets on your skin or clothing, use a brush to remove it, blow it off,
or wash it off with cold water and mild soap.
5. Remove a new cartridge from the box.
6. Vigorously shake and/or slap the new cartridge with your hand until the Dry Ink/Toner
is completely loosened.
Caution
Dry ink/toner settles and compacts during shipping and must be loosened before
inserting the cartridge into the machine. Failure to completely loosen the material
may cause damage to the gear at the end of the cartridge.
9-19
Xerox
®
Color 800/1000 Press
User Guide
Maintenance