Xerox Color 1000 User Manual - page 288
Other manuals for Color 1000:
System Administration Manual
of
396
3. While pressing the lever to the right, pull out the booklet staple cartridge unit.
4. Hold the tabs of the staple cartridge unit by the tabs and lift to remove it.
5. While holding the tabs of a new staple cartridge, push it into the unit.
6. Push the staple cartridge unit to its original position in the machine.
7. Close the Right Cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Xerox
®
Color 800/1000 Press
17-10
User Guide
Standard/Booklet Maker Finisher