Yamaha 2004 FZ6-SS Service Manual - Chk

3-47

BLEEDING THE HYDRAULIC BRAKE SYSTEM/

ADJUSTING THE SHIFT PEDAL

CHK

ADJ

WARNING

a

b

h. Tighten the bleed screw and then release the

brake lever or brake pedal.

i. Repeat steps (e) to (h) until all of the air

bubbles have disappeared from the brake

fluid in the plastic hose.

j. Tighten the bleed screw to specification.

Bleed screw

6 Nm (0.6 m

Skg, 4.3 ftSlb)

k. Fill the brake fluid reservoir to the proper lev-

el with the recommended brake fluid.

Refer to “CHECKING THE BRAKE FLUID

LEVEL”.

After bleeding the hydraulic brake system,

check the brake operation.

EAS00136

ADJUSTING THE SHIFT PEDAL

1. Check:

Sshift pedal position

Align the center of shift pedal 

1

 and center

of footrest bracket bolt 

2

 in a straight line.

Incorrect 

! Adjust.

2. Adjust:

Sshift pedal position

a. Loosen both locknuts 

2

.

b. Turn the shift rod 

3

 in direction 

a

 or 

b

 to

obtain the correct shift pedal position.

Direction

Shift pedal is raised.

Direction

Shift pedal is lowered.

c. Tighten both locknuts.