Yamaha 2004 FZ6-SS Service Manual - Cool
6-7
OIL COOLER
COOL
63 Nm (6.3 m
Skg, 46 ftSlb)
NOTE:
EAS00458
CHECKING THE OIL COOLER
1. Check:
Soil cooler
Cracks / damage
! Replace.
2. Check:
Soil cooler inlet hose
Soil cooler outlet hose
Cracks / damage / wear
! Replace.
EAS00459
INSTALLING THE OIL COOLER
1. Clean:
Smating surfaces of the oil cooler and the
crankcase
(with a cloth dampened with lacquer thinner)
2. Install:
SO-ring
New
Soil cooler
1
Swasher
2
New
Sunion bolt
3
SBefore installing the oil cooler, lubricate the
union bolt and O-ring with a thin coat of engine
oil.
SMake sure the O-ring is positioned properly.
3. Fill:
Scooling system
(with the specified amount of the recom-
mended coolant)
Refer to “CHANGING THE COOLANT” in
chapter 3.
4. Fill:
Scrankcase
(with the specified amount of the recom-
mended engine oil)
Refer to “CHANGING THE ENGINE OIL” in
chapter 3.
5. Check:
Scooling system
Leaks
! Repair or replace any faulty part.
6. Measure:
Sradiator cap opening pressure
Below the specified pressure
! Replace the
radiator cap.
Refer to “CHECKING THE RADIATOR”.