Yamaha 2004 FZ6-SS Service Manual - Chas
4-49
FRONT FORK
CHAS
CAUTION:
NOTE:
CAUTION:
3. Remove:
Sdust seal
1
Soil seal clip
2
(with a flat-head screwdriver)
Do not scratch the inner tube.
4. Remove:
Sdamper rod assembly bolt
While holding the damper rod assembly with the
damper rod holder
1
and T-handle
2
, loosen
the damper rod assembly bolt.
Damper rod holder
90890-01294
T-handle
90890-01326
5. Remove:
Sinner tube
a. Hold the front fork leg horizontally.
b. Securely clamp the brake caliper bracket in a
vise with soft jaws.
c. Separate the inner tube from the outer tube
by pulling the inner tube forcefully but care-
fully.
SExcessive force will damage the oil seal
and bushing. A damaged oil seal or bush-
ing must be replaced.
SAvoid bottoming the inner tube into the
outer tube during the above procedure, as
the oil flow stopper will be damaged.