Yamaha 2004 FZ6-SS Service Manual - Chk
3-17
ADJUSTING THE VALVE CLEARANCE/
SYNCHRONIZING THE THROTTLE BODIES
CHK
ADJ
NOTE:
NOTE:
NOTE:
7. Install:
Sall removed parts
For installation, reverse the removal procedure.
SYNCHRONIZING THE THROTTLE BODIES
Prior to synchronizing the throttle bodies, the
valve clearance and the engine idling speed
should be properly adjusted and the ignition tim-
ing should be checked.
1. Stand the motorcycle on a level surface.
Place the motorcycle on a suitable stand.
2. Remove:
Sseat
Refer to “SEAT”.
Sfront cowling inner panel (left and right)
Refer to “COWLINGS”
Sfuel tank
Refer to “FUEL TANK”.
Sair filter case
Refer to “AIR FILTER CASE”.
3. Install:
Svacuum gauge
1
(onto the synchronizing hose
2
)
Vacuum gauge
90890-03094, YU-08030
4. Install:
Sair filter case
Refer to “AIR FILTER CASE”.
Sfuel tank
Refer to “FUEL TANK”.
Schanging the meter display.
Refer to “FEATURES” in chapter 1.
5. Start the engine and let it warm up for several
minutes.