Yamaha 2004 FZ6-SS Service Manual - Gen
1-11
SPECIAL TOOLS
GEN
INFO
Tool No.
Tool name / Function
Illustration
Middle driven shaft
bearing driver
90890-04058
YM-4058
Mechanical seal
installer
90890-04078
YM-33221
Middle driven shaft bearing driver
Mechanical seal installer
These tools are used to install the water pump
seal.
90890-04086
YM-91042
Clutch holding tool
This tool is used to hold the clutch boss
when removing or installing the clutch boss
nut.
90890-04101
Valve lapper
This tool is needed to remove and install
the valve lifter.
90890-04111
Valve guide remover (
φ4)
This tool is used to remove or install the valve
guides.
90890-04112
Valve guide installer (
φ4)
This tool is used to install the valve guides.
90890-04113
YM-04113
Valve guide reamer (
φ4)
This tool is used to rebore the new valve
guides.
90890-06754
YM-34487
Ignition checker
This tool is used to check the ignition system
components.
90890-06756
YB-35956
Vacuum/pressure pump gauge set
This tool used to measure the vacuum pres-
sure.
90890-85505
ACC-11001-
05-01
Yamaha bond No. 1215
This bond is used to seal two mating surfaces
(e.g., crankcase mating surfaces).