Yamaha BLASTER YFS200S Owner's Manual - page 109
Other manuals for BLASTER YFS200S:
Owner's Manual
of
168
EBU12771
Transmission oil
Transmission oil measurement
1. Place the machine on a level surface.
2. Warm up the engine for several minutes,
and stop it.
3. Check the oil level through the level win-
dow located at the right side crankcase
cover.
NOTE:
Wait a few minutes until the oil level settles
before checking.
4. The oil level should be between the mini-
mum and maximum level marks. If the
level is low, add the recommended oil to
raise it to the proper level.
Transmission oil replacement
1. Place the machine on a level surface.
2. Warm up the engine for several minutes,
and stop it.
3. Place a container under the engine to col-
lect the used oil.
1. Level window
2. Maximum level mark
3. Minimum level mark
1
2
3
1
8-6
5VM-9-11_4 3/11/03 1:11 PM Page 7