Yamaha BLASTER YFS200S Owner's Manual - page 46

c

C

8 In order to prevent clutch slippage (since

the transmission oil also lubricates the

clutch), do not mix any chemical additives.

Do not use oils with a diesel specification of

“CD” or oils of a higher quality than speci-

fied. In addition, do not use oils labeled

“ENERGY CONSERVING II” or higher.

8 Make sure that no foreign material enters

the crankcase.

EBU00498

Chain

Check the general condition of the chain and

check the chain slack before every ride.

Lubricate and adjust the chain as necessary.

(See pages 8-32–8-34 for details.)

EBU01083

Throttle lever

Check to see that the throttle lever operates cor-

rectly. It must open smoothly and spring back to

the idle position when released. Have a Yamaha

dealer repair as necessary for proper operation.

EBU01162

Fittings and fasteners

Always check the tightness of chassis fittings

and fasteners before a ride. Take the machine

to a Yamaha dealer or refer to the Service

Manual for correct tightening torque.

EBU00803

Lights

Check the headlight and tail/brake light to make

sure they are in working condition. Repair as

necessary for proper operation.

EBU01170

Switches

Check the operation of all switches. Have a

Yamaha dealer repair as necessary for proper

operation.

5-7

 5VM-9-11_2  3/11/03 1:09 PM  Page 8