Yamaha BLASTER YFS200S Owner's Manual - page 146

2. Remove the defective bulb from the bulb

holder by pushing it inward and turning it

counterclockwise.

1. Bulb holder

2. Bulb

3. Install a new bulb in the bulb holder by

pushing it inward and turning it clockwise.

4. Install the bulb holder (together with the

bulb) by turning it clockwise.

EBU00412

Troubleshooting

Although Yamaha machines receive a rigid

inspection before shipment from the factory,

trouble may occur during operation. Any prob-

lem in the fuel, compression, or ignition systems

can cause poor starting and loss of power. The

troubleshooting chart describes a quick, easy

procedure for making checks. If your machine

requires any repair, take it to a Yamaha dealer.

The skilled technicians at a Yamaha dealership

have the tools, experience, and know-how to

properly service your machine. Use only gen-

uine Yamaha parts on your machine. Imitation

parts may look like Yamaha parts, but they are

often inferior. Consequently, they have a shorter

service life and can lead to expensive repair

bills.

q

w

8-43

 5VM-9-11_4  3/11/03 1:11 PM  Page 44