Yamaha BLASTER YFS200S Owner's Manual - page 140

EBU01112

Wheel removal

1. Loosen the wheel nuts.

2. Elevate the ATV and place a suitable stand

under the frame.

3. Remove the nuts from the wheel.

4. Remove the wheel.

EBU01300

Wheel installation

1. Install the wheel and the nuts.

2. Lower the ATV to the ground.

3. Tighten the wheel nuts to the specified

torque.

Tightening torque:

Front wheel nut:

45 Nm (4.5 m

0kgf, 32 ft0lbf)

Rear wheel nut:

45 Nm (4.5 m

0kgf, 32 ft0lbf)

Front

Rear

8-37

 5VM-9-11_4  3/11/03 1:11 PM  Page 38