Yamaha BLASTER YFS200S Owner's Manual - page 48

5-9

EBU00159

How to measure tire pressure

Use the low-pressure tire gauge.

NOTE:

The low-pressure tire gauge is included as stan-

dard equipment. Make two measurements of the

tire pressure and use the second reading. Dust

or dirt in the gauge could cause the first reading

to be incorrect.

Set pressure with tires cold.

Set tire pressures to the following specifications:

1. Low-pressure tire gauge

q

30 kPa

(0.30 kgf/cm

2

,

4.4 psi)

27 kPa

(0.27 kgf/cm

2

,

3.9 psi)

33 kPa

(0.33 kgf/cm

2

,

4.7 psi)

25 kPa

(0.25 kgf/cm

2

,

3.6 psi)

22 kPa

(0.22 kgf/cm

2

,

3.2 psi)

28 kPa

(0.28 kgf/cm

2

,

4.0 psi)

Front

Rear

Recommended

pressure

Minimum

Maximum

4. Use no more than the following pres-

sures when seating the tire beads.

Front 330 kPa (3.3 kgf/cm

2

, 47 psi)

Rear 280 kPa (2.8 kgf/cm

2

, 40 psi)

Higher pressures may cause the tire to

burst. Inflate the tires very slowly and

carefully. Fast inflation could cause

the tire to burst.

 5VM-9-11_2  3/11/03 1:09 PM  Page 10