Yamaha BLASTER YFS200S Owner's Manual - Qwarning
Other manuals for BLASTER YFS200S:
Owner's Manual
of
168
8-27
EBU01191
Brake pedal height adjustment
The top of the brake pedal should be positioned
0–10 mm (0–0.4 in) below the top of the
footrest. If not, have a Yamaha dealer adjust it.
a. Brake pedal height
a
POTENTIAL HAZARD
Operating with improperly serviced or
adjusted brakes.
WHAT CAN HAPPEN
You could lose braking ability, which
could lead to an accident.
HOW TO AVOID THE HAZARD
After servicing:
8 Make sure the brakes operate smoothly
and that the brake pedal position is cor-
rect.
8 Make sure the brakes do not drag.
8 Make sure the brakes are not spongy.
All air must be bled from the brake sys-
tem.
Replacement of brake components
requires professional knowledge. These
procedures should be performed by a
Yamaha dealer.
qWARNING
5VM-9-11_4 3/11/03 1:11 PM Page 28