Yamaha BLASTER YFS200S Owner's Manual - page 37
Other manuals for BLASTER YFS200S:
Owner's Manual
of
168
EBU01287
Rear shock absorber adjustment
The spring preload can be adjusted to suit the
rider’s weight and riding conditions.
Adjust the spring preload as follows.
1. Loosen the locknut.
2. To increase the spring preload, turn the
adjusting nut in direction a. To decrease
the spring preload, turn the adjusting nut in
direction b.
c
C
Never attempt to turn the adjusting nut
beyond the maximum or minimum setting.
3. The length of the spring changes 1 mm
(0.04 in) per turn of the adjusting nut.
4-15
a
Standard length:
230 mm (9.1 in)
Minimum length (hard):
222 mm (8.7 in)
Maximum length (soft):
234 mm (9.2 in)
q
w
b
a
1. Adjusting nut
2. Locknut
a. Spring length
5VM-9-11_1 3/11/03 1:08 PM Page 4-15