Yamaha BLASTER YFS200S Owner's Manual - page 123
Other manuals for BLASTER YFS200S:
Owner's Manual
of
168
8-20
5. Install the mixing chamber cap and tighten
it.
6. Install the securing plate by installing the
screw.
NOTE:
When installing the securing plate, align the slot
in the securing plate with a projection on the car-
buretor mixing chamber cap.
1. Screw
2. Projection
3. Slot
7. Install the carburetor and tighten the clamp
screws.
8. Connect the fuel hose and the oil hose.
9. Tighten the carburetor float bowl drain
screw.
5VM-9-11_4 3/11/03 1:11 PM Page 21