Yamaha BLASTER YFS200S Owner's Manual - page 141
Other manuals for BLASTER YFS200S:
Owner's Manual
of
168
EBU01292
Replacing a headlight bulb
If a headlight bulb burns out, replace the bulb as
follows.
1. Remove the front panel by removing the
screws.
2. Remove the headlight beam adjusting
screw, the washer, the spring and the nut.
NOTE
When removing the headlight adjusting screw,
be careful not to lose the spring and nut.
1. Headlight beam adjusting screw
2. Washer
3. Spring 4. Nut
3. Disconnect the main switch leads.
1. Front panel
2. Main switch lead (
×2)
2
2
1
1
3
4
2
1. Front panel
2. Screw (
×4)
8-38
1
2
5VM-9-11_4 3/11/03 1:11 PM Page 39