Accu-Chek Mobile User Manual - page 162
Acoustic mode
162
6.3 Announcement of the result after a test
In the acoustic mode, whenever the meter displays a
result following a blood glucose test, it also announces
the result as a series of beeps. The result is not treated
as an entity, but is broken down into individual digits.
Example:
The result 7.6 mmol/l is announced as 0 – 7 – deci-
mal point – 6.
Each digit is represented by the corresponding number
of beeps, e.g. 4 beeps for the number 4 ( ).
Zero is represented by a long beep (
).
Results which are lower than 0.6 mmol/l and are
displayed as
are announced acoustically as
0 – 0 – decimal point – 0.
Results which are higher than 33.3 mmol/l and are
displayed as
are announced acoustically as 9 – 9
– decimal point – 9.
The result is announced three times in succession.
Each announcement is preceded by 2 short beeps
(
). Altogether, therefore, you hear: result
result result.
Symbols, such as or
, which are displayed toge-
ther with the result are not announced acoustically.
If you turn off the meter using the On/Off button
while the result is being announced acoustically, the
announcement will be interrupted and 2 short beeps
will sound four times in succession (
).