Accu-Chek Mobile User Manual - page 65

Testing blood glucose

65

Starting a blood glucose test by opening the tip cover 

1 

Place your 

fi

nger on the corrugated area on the tip 

cover and push it in the direction of the arrow as 

far as it will go. 

After overcoming a slight resistance, the tip cover 

clicks into place.

  Be careful not to touch the tape when doing 

this as this could damage it.

If the meter was turned off, it now turns on. 

A beep will sound (if 

Beep tones

 is turned on) and the 

display check will be displayed, followed by the num-

ber of available tests.

2 

Check that there are no irregularities in the 

checkerboard pattern.