Can-Am 2009 Outlander 500 EFI Operator's Manual - page 104
of
152
MAINTENANCE PROCEDURES
V06G0RY
TYPICAL
Lift and hold the spindle then remove
the bulb.
V06G0SY
TYPICAL
Properly reinstall removed parts in the
reverse order of their removal.
Headlight Beam Aiming
Adjust beam aiming as follows:
Turn knobs to adjust beam height and
side orientation to your convenience.
Adjust both headlights evenly.
vmo2006-005-040_b
TYPICAL
1. Headlight cover
2. Adjustment screws
Brake Light and Rear Position Light
Bulb Replacement
To have access to bulb, pull on taillight
to release it from its rubber grommets.
vmo2008-001-005_a
Turn and pull light socket to expose
bulb.
vmo2008-001-006
102
______________