Can-Am 2009 Outlander 500 EFI Operator's Manual - 18) Roller Fairlead
CONTROLS/INSTRUMENTS/EQUIPMENT
vmo2006-016-001_b
TYPICAL
1. In
2. Out
18) Roller Fairlead
XT Models
The roller fairlead is used to prevent
damages to the vehicle and guide the
wire rope into the winch.
vmo2007-003-016_a
1. Winch
2. Roller fairlead
3. Winch hook
19) Winch Remote Control
XT Models
A winch remote control is provided
with the vehicle to ease winch opera-
tion if necessary.
The winch remote control is located in
the access panel of the front service
compartment.
vmo2008-001-001_a
TYPICAL — FRONT ACCESS PANEL
1. Winch remote control
To use the winch remote control
switch instead of the handlebar control
switch, connect the remote control in-
to the provided connection of the front
service compartment.
NOTICE
Always disconnect and
store the remote control when not in
use.
vmo2007-003-017_a
FRONT SERVICE COMPARTMENT
1. Remote control connection
Refer to
BASIC GUIDE TO WINCHING
TECHNIQUES
for more information.
70
______________