Can-Am 2009 Outlander 500 EFI Operator's Manual - page 82
MAINTENANCE SCHEDULE
PERIODIC MAINTENANCE CHART
INITIAL INSPECTION 10 H OR 300 km (185 mi)
(To be performed by an authorized Can-Am dealer. The initial maintenance is
very important and must not be neglected.)
25 H OR 750 km (470 mi)
50 H OR 1500 km (930 mi)
100 H OR 1 YEAR OR 3000 km (1865 mi)
200 H OR 2 YEARS OR 6000 km (3730 mi)
A: ADJUST
C: CLEAN
I: INSPECT
L: LUBRICATE
R: REPLACE
TO BE PERFORMED BY
PART/TASK
LEGEND
ELECTRICAL SYSTEM
Spark plug
(5)
I
R
Customer
Battery connections
I
I
Customer
ECM connectors (visual inspection
without disconnecting)
I
Dealer
Electrical connections and
fastening (ignition system, starting
system, fuel injectors etc.)
I
I
Dealer
Digitally Encoded Security System
(DESS)
I
I
Dealer
Ignition switch, engine start button
and engine stop switch
(2)
I
I
Customer
Lighting system (HI/LO intensity,
brake light, taillight, headlight
aiming, etc.)
(2)
I
I
Customer
Winch
Refer to vehicle BASIC
GUIDE TO WINCHING
TECHNIQUES
Customer
(2) Pre-ride inspection item.
(5) Make sure the spark plug
is correctly apped.
CVT TRANSMISSION
Drive belt
I
Dealer
Drive and driven pulleys
(including one-way bearing)
I, C,
L
Dealer
CVT air inlet (500/650)
I
I,C
Dealer
CVT air filter
(800R)
I
I,
C
(4)
Customer
—
80
______________