Can-Am 2009 Outlander 500 EFI Operator's Manual - Drive Shaft Boot/protector
of
152
MAINTENANCE PROCEDURES
Push the bulb in and hold while turning
counterclockwise to release.
Install the new bulb by pushing in while
turning clockwise.
Reinstall all removed parts.
Drive Shaft Boot/Protector
Drive Shaft Boot/Protector
Inspection
Visually inspect drive shaft protectors
and boots conditions.
Check protectors for damage or rub-
bing against shafts.
Check boots for cracks, tears, leaking
grease etc.
Repair or replace damaged parts as
necessary.
V07H01Y
2
1
TYPICAL — FRONT OF VEHICLE
1. Drive shaft protector
2. Drive shaft boots
1
V07H02Y
1
2
2
TYPICAL — REAR OF VEHICLE
1. Drive shaft protectors
2. Drive shaft boots
Wheels and Tires
Wheel Bearing Inspection
Push and pull the wheels from the up-
per edge to feel the play.
See an authorized Can-Am dealer if
there is any play.
V07H03Y
TYPICAL
______________
103