Can-Am 2009 Outlander 500 EFI Operator's Manual - Warning
CONTROLS/INSTRUMENTS/EQUIPMENT
ufacturer recommendations. Refer to
SPECIFICATIONS
for carrying loads
and towing recommendations.
1
V07L0TY
TYPICAL
1. Trailer hitch
WARNING
Ensure to install the proper ball
size that matches the equipment
you will tow.
NOTE:
Follow manufacturer's instruc-
tions for proper attachment.
15) Tool Kit
The tool kit is located in the rear stor-
age compartment. It contains tools
for basic maintenance, this Opera-
tor's Guide and the
BASIC GUIDE TO
WINCHING TECHNIQUES
with the
XT
models
.
16) Winch
XT Models
vmo2007-003-016_a
1. Winch
2. Roller fairlead
3. Winch hook
17) Winch Control Switch
XT Models
Use this switch to roll in or out wire
from winch.
To take out wire from winch, press the
left side of switch.
To get wire into the winch, press the
right side of switch.
Refer to
BASIC GUIDE TO WINCHING
TECHNIQUES
for more information.
NOTE:
A winch remote control is al-
so provided with the vehicle to ease
winch operation if necessary, refer to
WINCH REMOTE CONTROL
further in
this section.
_______________
69