Can-Am 2009 Outlander 500 EFI Operator's Manual - Cvt Cover Drain Screw
MAINTENANCE PROCEDURES
CVT Air Filter Installation
1. Unscrew clamp completely.
2. Pre-install clamp on foam.
vmo2009-008-035
CLAMP PRE-INSTALLATION
3. Insert foam with clamp on CVT air
inlet as per the following illustra-
tion.
4. Ensure that the clamp is properly
positioned on the air inlet edge and
clamp nut is positioned upwards.
5. Tighten clamp completely.
vmo2009-008-036_a
CVT AIR INLET REMOVED FOR CLARITY
PURPOSE
1. Foam
2. Clamp nut
3. CVT air inlet
6. Install CVT filter elastic around
clamp.
vmo2009-008-037_a
CVT AIR INLET REMOVED FOR CLARITY
PURPOSE
1. CVT filter elastic
2. Clamp
The following illustration shows the fi-
nal assembly.
vmo2009-008-038
CVT AIR INLET REMOVED FOR CLARITY
PURPOSE
7. Install CVT access cover using plas-
tic darts.
8. Install central panel.
9. Install seat.
CVT Cover Drain Screw
Any time you suspect that water has
entered the CVT cover, drain the CVT
housing by removing the drain screw.
94
______________