Can-Am DS250 Operator's Manual - page 49
RIDING THE VEHICLE
This vehicle is not designed for riding on roads or highways. In most places it is an
illegal practice. Riding your vehicle on roads or highways could cause a collision to
occur with another vehicle. The tires of this vehicle are not suited for paved road
use. Pavement may seriously affect the handling and control of the vehicle. Riding
on roads or soft shoulders may confuse other road users, especially if your lights
are on. If you have to cross a road, the lead driver should get off his vehicle then
observe and give directions to the other riders. The last person after crossing then
assists the lead driver to cross. Do not travel sidewalks. They are designated for
pedestrian use.
Water can be a unique hazard. If it is too deep the vehicle may “float” and topple.
Check the water depth and current before you attempt to cross any water. Water
should not go above the footrest. Be wary of slippery surfaces such as rocks,
grass, logs, etc., both in the water and on its banks. A loss of traction may occur.
Do not attempt to enter the water at high speed. The water will act as a brake and
could throw you.
V00A0VL
Water will affect the braking ability of your vehicle. Make sure you dry the brakes
by applying them several times after the vehicle leaves the water.
Mud or marsh lands may be encountered near water. Be prepared for sudden
“holes” or changes in depth. Similarly so, be watchful of hazards such as rocks,
logs, etc., partially covered by vegetation.
If your trip crosses frozen waterways, make sure that the ice is thick enough and
sound enough to support the total weight of yourself, the vehicle and its load. Be
ever watchful of open water... it is a sure indication that the ice thickness will vary.
If in doubt, do not attempt to cross.
____________
SAFETY INFORMATION
___________
47