Can-Am DS250 Operator's Manual - page 91
GEARBOX
Gearbox Recommended
Oil
Use XP-S chaincase oil (P/N 413 801
900) or an equivalent.
NOTICE
Do
not
use
unrecom-
mended other types of oil when ser-
vicing. Do not mix with other types
of oil.
Gearbox Oil Level
The gear box oil level cannot be
checked.
The only way to ensure the level is cor-
rect is to drain gearbox and refill with
the right quantity of oil. Refer to
GEAR-
BOX OIL CHANGE
for procedure.
Gearbox Oil Change
Place the vehicle on a level surface.
Remove the drive chain protector.
vmo2006-014-038_a
1. Drive chain protector
Clean fill and drain plug areas.
Remove gearbox fill plug.
Place a drain pan under the gearbox
drain plug area then remove plug.
vmo2006-014-039_a
1. Gearbox drain plug
2. Gearbox fill plug
NOTE: To completely drain the gear-
box, place a jack under the left footpeg
and tilt the vehicle toward the right
side.
When the gearbox is empty, install
and torque the drain plug at 9 N•m
(80 lbf•in) and replace the vehicle on
the ground.
Refill gearbox, using 800 ml (27 U.S.
oz.) of XP-S chaincase oil (P/N 413 801
900) or an equivalent.
NOTE: Gearbox oil quantity is also
written on the gearbox cover.
NOTICE
Do not use other unrec-
ommended types of oil when servic-
ing. Do not mix with other types of
oil.
Reinstall and torque oil fill plug to
39 N•m (29 lbf•ft).
_____________________
89