Can-Am DS250 Operator's Manual - page 83
ENGINE
Oil Viscosity chart
SAE 5W 40 (XP-S 5W 40 Synthetic Oil)
SAE 0W 30
SAE 5W 30
(XP-S 5W 30 Mineral Oil)
SAE 10W 30
SAE 10W 40
(XP-S 10W 40 Mineral Oil)
SAE 15W40
SAE 20W50
Temperature Range
50°C (122°F)
40°C (104°F)
30°C (86°F)
20°C (68°F)
10°C (50°F)
0°C (32°F)
- 10°C (14°F)
- 20°C (- 4°F)
- 30°C (- 22°F)
Engine Oil Level
NOTICE
Check
level
frequently
and refill if necessary. Do not over-
fill. Operating the engine with an
improper level may severely dam-
age engine. Wipe off any spillage.
vmo2006-014-019_a
RH SIDE OF ENGINE
With vehicle on a level surface and en-
gine cold, not running, check the oil lev-
el as follows:
1. Unscrew dipstick then remove it
and wipe clean.
2. Reinstall dipstick (do not screw it
in).
3. Remove and check oil level. It
should be near or equal to the up-
per mark.
vmo2006-014-020_a
1. Full
2. Add
3. Operating range
To add oil, remove dipstick.
Place a funnel into the dipstick tube to
avoid spillage.
Add a small amount of recommended
oil and recheck oil level.
Repeat the operation until oil level
reaches the dipstick's full mark. Do
not overfill.
_____________________
81