Can-Am DS250 Operator's Manual - page 82
ENGINE
Air Filter Housing Draining
NOTICE
Never remove or mod-
ify any component in the air filter
housing. The engine carburation
is calibrated to operate specifically
with these components. Otherwise,
engine performance degradation or
damage can occur.
Periodically inspect air filter housing
drain tube for liquid or deposits.
vmo2006-014-044_a
TYPICAL
1. Air filter housing
2. Drain tube
3. Clamp
NOTE: If vehicle is used in dusty area,
inspect more frequently than specified
in
MAINTENANCE CHART
.
If liquid/deposits are found, squeeze
and remove the clamp. Pull drain tube
out and empty it.
NOTICE
Do not start engine when
liquid/deposits are found in the
drain tube.
When liquid/deposits are found, the
air filter must be inspected/dried/
replaced depending on its condition.
Engine Oil
Recommended Engine Oil
Use 4-stroke engine oil that meets
or exceeds the requirements for API
service classification SM, SL or SJ. Al-
ways check the API service label on
the oil container, it must contains at
least one of the above standards.
Engine Oil Viscosity
To select the right oil viscosity accord-
ing to ambient temperature, see chart
below.
NOTE: For improved overall perfor-
mance and all season application, use
XP-S 5W40 synthetic oil (P/N 293 600
039).
80
______________________