D-Link DES-3828 - xStack Switch - Stackable User Manual - Forwarding
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
101
Forwarding
Unicast Forwarding
Open the Forwarding folder in the Layer 2 Features menu and click on the Unicast Forwarding
link.
Figure 7- 31. Setup Static Unicast Forwarding Table window
To add or edit an entry, define the following parameters and then click Add/Modify:
Parameter Description
VLAN ID (VID)
The VLAN ID number of the VLAN on which the above Unicast MAC address
resides.
MAC Address
The MAC address to which packets will be statically forwarded. This must be a
unicast MAC address.
Click Apply to implement the changes made. To delete an entry in the Static Unicast Forwarding
Table, click the corresponding X under the Deleteheading.
Static Multicast Forwarding
The following figure and table describe how to set up Multicast Forwarding on the Switch. Open the
Forwarding Filtering folder and click on the Multicast Forwarding link to see the entry screen
below:
Figure 7- 32. Static Multicast Forwarding Settings window
The Static Multicast Forwarding Settings window displays all of the entries made into the Switch's
static multicast forwarding table. Click the Add button to open the Setup Static Multicast For-
warding Table window, as shown below: