D-Link DES-3828 - xStack Switch - Stackable User Manual - Vrrp Virtual Router Settings
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
148
VRRP Virtual Router Settings
The following window will allow the user to view the parameters for the VRRP function on the
Switch. To view this window, click Layer 3 Features > VRRP > VRRP Virtual Router Settings:
Figure 8- 46. VRRP Virtual Router Settings window
The following fields are displayed in the window above:
Parameter
Description
VRID / Interface
Name
VRID - Displays the virtual router ID set by the user. This will uniquely identify the
VRRP Interface on the network.
Interface Name - An IP interface name that has been enabled for VRRP. This entry
must have been previously set in the IP Interfaces table.
Virtual IP Address
The IP address of the Virtual router configured on the Switch.
Master IP Address
Displays the IP address of the Master router for the VRRP function.
Virtual Router State
Displays the current state of the Virtual Router on the Switch. Possible states include
Initialize, Master and Backup.
State
Displays the VRRP state of the corresponding VRRP entry.
Display
Click the
button to display the settings for this particular VRRP entry.
Delete
Click the
to delete this VRRP entry.
Click the Add button to display the following window to configure a VRRP interface.