D-Link DES-3828 - xStack Switch - Stackable User Manual - Ports
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
3
•
MIB support for:
•
RFC1213 MIB II
•
RFC1493 Bridge
•
RFC2819 RMON
•
RFC2665 Ether-like MIB
•
RFC2863 Interface MIB
•
Private MIB
•
RFC2674 for 802.1p
•
IEEE 802.1x MIB
•
IEEE 802.3x flow control in full duplex mode
•
IEEE 802.1p Priority Queues
•
IEEE 802.3u 100BASE-TX compliant
•
RS-232 DCE console port for Switch management
•
Provides parallel LED display for port status such as link/act, speed, etc.
•
IEEE 802.3 10BASE-T compliant
•
High performance switching engine performs forwarding and filtering at full wire speed,
maximum 14, 881 packets/sec on each 10Mbps Ethernet port, and maximum 148,810
packet/sec on 100Mbps Fast Ethernet port.
•
Full- and half-duplex for both 10Mbps and 100Mbps connections. Full duplex allows the
switch port to simultaneously transmit and receive data. It only works with connections to
full-duplex-capable end stations and switches. Connections to a hub must take place at half-
duplex
•
Support broadcast storm filtering
•
Non-blocking store and forward switching scheme capability to support rate adaptation and
protocol conversion
•
Supports by-port Egress/Ingress rate control.
•
Efficient self-learning and address recognition mechanism enables forwarding rate at wire
speed
Ports
The Swich provides 24 10/100BASE-TX ports. All 24 ports comply with the following standards:
•
IEEE 802.3
•
IEEE 802.3u
•
Support Half/Full-Duplex operations
•
All ports support Auto MDI-X/MDI-II cross over
•
Support back pressure for Half-duplex mode