D-Link DES-3828 - xStack Switch - Stackable User Manual - Mac Notification Settings
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
50
HH:MM
DST Repeating Settings - Using repeating mode will enable DST seasonal time adjustment. Repeating mode
requires that the DST beginning and ending date be specified using a formula. For example, specify to begin
DST on Saturday during the second week of April and end DST on Sunday during the last week of October.
From: Which Day
Enter the week of the month that DST will start.
From: Day of Week Enter the day of the week that DST will start on.
From: Month
Enter the month DST will start on.
From: time in
HH:MM
Enter the time of day that DST will start on.
To: Which Day
Enter the week of the month the DST will end.
To: Day of Week
Enter the day of the week that DST will end.
To: Month
Enter the month that DST will end.
To: time in HH:MM
Enter the time DST will end.
DST Annual Settings - Using annual mode will enable DST seasonal time adjustment. Annual mode requires
that the DST beginning and ending date be specified concisely. For example, specify to begin DST on April 3
and end DST on October 14.
From: Month
Enter the month DST will start on, each year.
From: Day
Enter the day of the week DST will start on, each year.
From: Time in
HH:MM
Enter the time of day DST will start on, each year.
To: Month
Enter the month DST will end on, each year.
To: Day
Enter the day of the week DST will end on, each year.
To: Time in HH:MM Enter the time of day that DST will end on, each year.
Click Apply to implement changes made to the Time Zone and DST window.
MAC Notification Settings
MAC Notification is used to monitor MAC addresses learned and entered into the forwarding
database. To globally set MAC notification on the Switch, open the following window by opening the
MAC Notification Settings in the Administration folder.