D-Link DES-3828 - xStack Switch - Stackable User Manual - Dns Relay Static Settings
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
146
Figure 8- 43. DNS Relay Global Settings window
The following fields can be set:
Parameter
Description
DNS State
This field can be toggled between Disabled and Enabled using the pull-down menu,
and is used to enable or disable the DNS Relay service on the Switch.
Primary Name Server Allows the entry of the IP address of a primary domain name server (DNS).
Secondary Name
Server
Allows the entry of the IP address of a secondary domain name server (DNS).
DNSR Cache Status
This can be toggled between Disabled and Enabled. This determines if a DNS cache
will be enabled on the Switch.
DNSR Static Table
State
This field can be toggled using the pull-down menu between Disabled and Enabled.
This determines if the static DNS table will be used or not.
Click Apply to implement changes made.
DNS Relay Static Settings
To view the DNS Relay Static Settings, click Layer 3 Features > DNS Relay > DNS Relay Static
Settings, which will open the DNS Relay Static Settings window, as seen below:
Figure 8- 44. DNS Relay Static Table