D-Link DES-3828 - xStack Switch - Stackable User Manual - Rip Interface Settings
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
113
Figure 8- 10. RIP Global Settings window
To enable RIP, simply use the pull-down menu, select Enabled and click Apply.
RIP Interface Settings
RIP settings are configured for each IP interface on the Switch. Click the RIP Interface Settings link
in the RIP folder. The menu appears in table form listing settings for IP interfaces currently on the
Switch. To configure RIP settings for an individual interface, click on the hyperlinked Interface
Name. To view the next page of RIP Interface Settings, click theNextbutton.
Figure 8- 11. RIP Interface Settings window
Click the hyperlinked name of the interface you want to set up for RIP, which will give access to the
following menu:
Figure 8- 12. RIP Interface Settings - Edit window
Refer to the table below for a description of the available parameters for RIP interface settings.
The following RIP settings can be applied to each IP interface: